MISCO PRODUCTS CORP -- EVERYDAY ALL PURPOSE CLEANER  -- 7930-00N038335
<pre>=====================  Product Identification  =====================

Product ID:EVERYDAY ALL PURPOSE CLEANER
MSDS Date:01/01/1991
FSC:7930
NIIN:00N038335
=== Responsible Party ===
Company Name:MISCO PRODUCTS CORP
Address:R D 9
Box:9155
City:READING
State:PA
ZIP:19605
Country:US
Info Phone Num:215-926-4106
Emergency Phone Num:215-926-4106
CAGE:0A3K2
=== Contractor Identification ===
Company Name:MISCO PRODUCTS CORP
Address:R D 9
Box:City:READING
State:PA
ZIP:19605
Country:US
Phone:215-926-4106
CAGE:0A3K2

=============  Composition/Information on Ingredients  =============

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: <100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:POTASSIUM TALL OIL SOAP
CAS:61790-44-1
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:NONIONIC SURFACTANT
CAS:9016-45-9
Fraction by Wt: 0-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ACETIC ACID, (ETHYLENEDINITRILO)TETRA-, TETRASODIUM SALT;
    (TETRASODIUM EDTA)
CAS:64-02-8
RTECS #:AH5075000
Fraction by Wt: 0-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PYROPHOSPHORIC ACID, TETRASODIUM SALT; (TETRASODIUM
    PYROPHOSPHATE). MFR CAS NO:77722-88-5.
CAS:7722-88-5
RTECS #:UX7350000
Fraction by Wt: 0-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PERFUME OIL
Fraction by Wt: 0-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:DYE
Fraction by Wt: 0-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN:PROLONGED OR REPEATED CONTACT MAY
    CAUSE DERMATITIS. EYE:IRRITANT. MAY CAUSE REDNESS OR SWELLING.
    INGEST:MAY BE IRRITATING TO THE MOUTH, THROAT & GI SYSTEM. VOMITING
    & DIARRHEA EXPECTED W/LARGE DO SES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . SKIN:FLUSH W/WATER. SEEK MEDICAL ATTENTION IF IRRITATION
    PERSISTS. EYES:FLUSH W/LARGE QUANTITIES OF WATER FOR AT LEAST 15
    MINU TES, HOLDING EYELIDS OPEN. SEEK MEDICALATTENTION.
    INGEST:DILUTE W/2 GLASSES OF WATER. SEEK MEDICAL ATTENTION IF
    SYMPTOMS PERSIST.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . NON-FLAMMABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:MOP UP OR OTHERWISE ABSORB & HOLD FOR
    DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. FOR USE
    BY TRAINED PERSONNEL ONLY. KEEP CONTAINER CLOSED DURING STORAGE.
    FOR INSTITUTIONAL & INDUSTRIAL USE ONLY.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NO SPECIAL REQUIREMENTS. NIOSH/MSHA APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:PROVIDE LOCAL EXHAUST TO KEEP TLV OF INGREDIENTS BELOW
    ACCEPTABLE LIMIT.
Protective Gloves:WATERPROOF GLOVES RECOMMENDED.
Eye Protection:CHEMICAL SAFETY GOGGLES .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:10-10.5.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:20 @ 68F
Vapor Density:>1
Spec Gravity:1.02
pH:SUPDAT
Evaporation Rate &amp; Reference:<1 (WATER=1)
Solubility in Water:COMPLETE
Appearance and Odor:MODERATELY VISCOUS PINK LIQUID W/PLEASANT ODOR.
Percent Volatiles by Volume:>85

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ANY METHOD I/A/W APPLICABLE FEDERAL, STATE &
    LOCAL LAWS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.